FSinn

[Theodore Martin]

I use FSINN on a Vista machine with FSX and never have to file a FP before enabling FSINN. As a mater of fact I always use FSINN to file my online flight plans.

Just to let you know that it is working correctly for someone with Vista & FSX.

[Wayne Pierce]

When I run SB, I get some assertion error but i think that is an error with SB

I use SB4 for my VATSIM comms as FSINN and my computer don't get along well. I was getting error messages with SB4 every few minutes and if you answer the question wrong it shuts off FSX.

I read a procedure on the SB4 forum to stop the error messages. I have not a single error message rear its head since then.

I load SB4 outside of the FSX environment. Do not use the menu bar at the top of FSX for addons. I start the SB4 from a shortcut menu ICON on my taskbar. It is not loaded up via FSX. This will do another thing, it will put the SB4 comm sound on a different sound channel from FSX and the volume can be controlled separately from the FSX sounds via your computer sound volume mixer, you can turn down the engine sound and talk this way.

Aside from the automation.dll in the fsx directory some of use the HIGHMEMFIX=1 in the FSX.cfg. I find this has really got rid of a host of problems i used to have.


WLP

[Wayne Pierce]

There are three ways to Squawk C. The floating radio ident menu comes up on your screen, mine disappeared some time ago and I can't find it now. Another way is through the main connection program menu under transponder. Then sometimes your radio in you cockpit will activate it.

I have had the Squawk C not work if my radios were not turned on in my cockpit. When you connect to Squawk box make sure you check what type of radio system you have in the aircraft.

Other than that it should be pretty much straight forward to Squawk C.

Check the SB4 forum if it is a continuing problem. I bet they have the answer.

WLP

[Wayne Pierce]

This topic has gone silent. I have been looking around and cant find anything helpful. I try using FSinn whenever im flying an MD80 but that crashes my flight sim. Any suggestions for sb or FSinn?

Thanks

Ben it has gone silent as no one seems to be able to help you. It was asked if you went to the FSINN or SB forums. It wasn't noted yay or nay.

This is the VATSIM FSINN forum, where really this type of problem needs to be addressed at. The answers may come more easily there.

http://forums.vatsim.net/viewforum.php?f=43

Here is the SB4 forum
http://squawkbox.ca/forum/

I hope you get it fixed. Good Luck.

[Wayne Pierce]

i was able to locate the issue and fix it. I can now squawk normal in any aircraft.

Ben, could you enlighten us as to the problem, it may help others here whom encounter the same thing.

We won't laugh too loud if it was just a keyboard to user interface problem.

WLP

[Harold Henderson]

i was able to locate the issue and fix it. I can now squawk normal in any aircraft.

Ben, could you enlighten us as to the problem, it may help others here whom encounter the same thing.

We won't laugh too loud if it was just a keyboard to user interface problem.

WLP

Yes, and the solution to the problem would be nice, too.


edited; Yeah, I got the Picture, Harold I am having an interface problem. WLP